If you need a new shingle roof in Brevard, here's what matters: fiberglass mat construction with ceramic granulated coating for UV protection and fire rating. Architectural shingles carry a Class A fire rating and wind resistance ratings up to 130 mph. Brevard Roofing & Maintenance helps you pick the right shingle for your home and budget.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Free Roof Estimate
Free on-site inspection. We measure, assess your roof deck condition, and walk you through architectural vs. three-tab shingles with realistic pricing. No pressure, just facts.
Tear-Off & Deck Prep
Old roof stripped to bare deck. We inspect the plywood or OSB sheathing for structural integrity, replace any compromised boards, and prep a clean, solid substrate for the new underlayment and shingles.
Waterproofing Layer
The waterproofing layer is what protects your home if a shingle ever fails. We install ice-and-water shield at every vulnerable point — valleys, eaves, penetrations — then roll synthetic underlayment over the entire deck. Drip edge directs water into gutters, not behind fascia boards.
Nailing & Overlap
Asphalt shingles laid from eave to ridge with precise offset between courses. Every shingle fastened in the manufacturer's nailing zone — too high or too low voids the warranty. Ridge cap and hip shingles complete the system with ridge vents for balanced attic ventilation.
What Brevard Customers Say
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"Best experience we've ever had with a home service company. On time, on budget, and the results exceeded what we expected. Truly top-notch."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
Why Choose Brevard Roofing & Maintenance for Shingle Roofing?
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
30+ Color Options
Architectural shingles in weathered wood, charcoal, onyx black, estate gray, desert tan, and 25+ more. We bring samples to your Brevard home so you can match your siding and trim.
Full Tear-Off Standard
We strip to the deck on every shingle job. No overlay shortcuts. Your underlayment, ice-and-water shield, and flashing are installed on a clean, inspected roof deck.